ブランド | REES52 |
---|---|
製品型番 | REES-01 |
製品サイズ | 2.54 x 2.54 x 2.54 cm; 18.14 g |
表札の名字 | スピードセンサー |
電圧 | 5 ボルト |
電池付属 | いいえ |
商品の重量 | 18.1 g |
こちらからもご購入いただけます
追加されました
追加されませんでした
¥365
& 配送料無料
& 配送料無料
発売元: 全国送料無料@国内発送@イーナ電気店
追加されました
追加されませんでした
¥370
4pt (1%)
& 配送料無料 発売元: ✅365COM 【インボイス対応】
追加されました
追加されませんでした
¥383
& 配送料無料
& 配送料無料
発売元: 全品送料無料COCO
REES52 MPU-6050 使用 3軸ジャイロスコープ・3軸加速度センサー モジュール
Amazonおすすめには、すぐに発送ができて、評価が高く、お求めやすい価格の商品が揃っています。
Amazon おすすめ
過去1か月で50点以上購入されました
¥435 ¥435 税込
Amazonによる発送
安心・安全への取り組み
お客様情報の保護
Amazonによる発送
安心・安全への取り組み
Amazonは安心・安全のために取り組んでいます。ストレスや不安なくお買い物いただくため、商品の返品対応やカスタマーサポート、信頼性のあるカスタマレビューのための健全なコミュニティの運営、お客様のプライバシーの保護などに取り組んでいます。また配送、梱包、製品、物流拠点などさまざまな面で、サステナブルな未来への取り組みを進めています。 詳細はこちら
お客様情報を保護しています
Amazonはお客様のセキュリティとプライバシーの保護に全力で取り組んでいます。Amazonの支払いセキュリティシステムは、送信中にお客様の情報を暗号化します。お客様のクレジットカード情報を出品者と共有することはありません。また、お客様の情報を他者に販売することはありません。 詳細はこちら
{"desktop_buybox_group_1":[{"displayPrice":"¥435","priceAmount":435.00,"currencySymbol":"¥","integerValue":"435","decimalSeparator":null,"fractionalValue":null,"symbolPosition":"left","hasSpace":false,"showFractionalPartIfEmpty":true,"offerListingId":"dVRHfOrRkdMHytOvQm1LJaCHq3%2Bf3UhM4FrtP1eWhuLUSP2HmRNzM18o2gZTlktTAgBhKEcIgRMBgXjx6Q9IzpCGv8bZ5Nvf3sfiGSDGNnGuxhSEe5TFa1k68TQKHBngrOESo8zS2ZQpUkciyruNmJPx11hmaZeYr6iYPEGpR3PJlBuctchaPw%3D%3D","locale":"ja-JP","buyingOptionType":"NEW","aapiBuyingOptionIndex":0}]}
購入オプションとあわせ買い
ブランド | REES52 |
商品寸法 (長さx幅x高さ) | 25 x 25 x 25 mm |
商品の重量 | 0.04 ポンド |
スタイル | スピードセンサー |
Amazon 新生活SALE (Final) 開催中
期間限定!人気商品がお買い得。最大5,000ポイント還元ポイントアップキャンペーン
Amazon 新生活SALE (Final) を今すぐチェック
Amazon 新生活SALE (Final) を今すぐチェック
よく一緒に購入されている商品

対象商品: REES52 MPU-6050 使用 3軸ジャイロスコープ・3軸加速度センサー モジュール
¥435¥435
最短で3月31日 日曜日のお届け予定です
残り19点 ご注文はお早めに
¥995¥995
最短で3月31日 日曜日のお届け予定です
在庫あり。
総額:
当社の価格を見るには、これら商品をカートに追加してください。
ポイントの合計:
pt
もう一度お試しください
追加されました
一緒に購入する商品を選択してください。
この商品をチェックした人はこんな商品もチェックしています
ページ 1 以下のうち 1 最初から観るページ 1 以下のうち 1
商品の説明
MPU-6050 使用 3軸ジャイロスコープ・3軸加速度センサー モジュール
商品の情報
詳細情報
登録情報
ASIN | B008BOPN40 |
---|---|
おすすめ度 |
5つ星のうち4.3 |
Amazon 売れ筋ランキング | - 9,435位産業・研究開発用品 (産業・研究開発用品の売れ筋ランキングを見る) - 11位ブレッドボード |
Amazon.co.jp での取り扱い開始日 | 2012/10/23 |
ご意見ご要望
特定の情報をお探しですか?
イメージ付きのレビュー

フィードバックをお寄せいただきありがとうございます
申し訳ありませんが、エラーが発生しました
申し訳ありませんが、レビューを読み込めませんでした
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
2024年2月26日に日本でレビュー済み
Amazonで購入
アマゾンプライムじゃないので2000円以上買わないと送料無料にはならないのですがこれは確か400円足らずなのに送料無料でした。動作確認もできました。
2023年3月1日に日本でレビュー済み
Amazonで購入
Unlike chips from other online shops, this one was not broken on arrival. Super!
2016年7月14日に日本でレビュー済み
Amazonで購入
問題なく到着しました。ピンヘッダは2種類付属しているので、場合によって選べるので便利です
手持ちのarudino naoで試してみましたが、数値のドリフトが大きいです。
MPU-6050の特性なのか、たまたまはずれ品だったのか不明です。
ちょっと実験するにはそんなに懐が痛まないで普通にしました。
手持ちのarudino naoで試してみましたが、数値のドリフトが大きいです。
MPU-6050の特性なのか、たまたまはずれ品だったのか不明です。
ちょっと実験するにはそんなに懐が痛まないで普通にしました。
2022年9月27日に日本でレビュー済み
Amazonで購入
Good quality
2018年7月4日に日本でレビュー済み
Amazonで購入
RC用のサーボで、2軸ジンバルを作成しました。
I2Cでしっかり加速度ピックアップとして信号を送ってくれているので、後段の信号処理のアルゴリズムの良否が求められますね。
わたしは…ノイズ除去系のフィルタを組み入れ、微分積分系のPIDを施して、ロボット姿勢センサみたいに実現したいと思ったのですが、中々難しく、動きはするのですが、まだ理想とした処理動作ができません。
これ使ってヌルヌルした動きを実現させている、頭の良い方がいてうらやましいです。
I2Cでしっかり加速度ピックアップとして信号を送ってくれているので、後段の信号処理のアルゴリズムの良否が求められますね。
わたしは…ノイズ除去系のフィルタを組み入れ、微分積分系のPIDを施して、ロボット姿勢センサみたいに実現したいと思ったのですが、中々難しく、動きはするのですが、まだ理想とした処理動作ができません。
これ使ってヌルヌルした動きを実現させている、頭の良い方がいてうらやましいです。
2020年5月1日に日本でレビュー済み
Amazonで購入
傾斜計に使おうとして購入しました。Arduino対応なので接続は簡単ですが、スケッチが3Kbyteを超えてしまいます。全体的に小型化したいのですが…。
他の国からのトップレビュー

Rodrigo
5つ星のうち5.0
Funciona sin problemas
2020年12月30日にメキシコでレビュー済みAmazonで購入
Funciona perfectamente

MAHEEDHAR REDDY GOTTIPOLU
5つ星のうち5.0
Works perfectly.
2021年6月28日にインドでレビュー済みAmazonで購入
I used this Sensor which works perfectly and shown given accuracte results. At first I feared whether online purchased components works or not, but I really happy that thi product is good. And REES52 was a trustable seller.


MAHEEDHAR REDDY GOTTIPOLU
2021年6月28日にインドでレビュー済み
このレビューの画像


EngineerInRealLife
5つ星のうち5.0
Fantastic chip, inexpensive but powerful
2016年3月24日にアメリカ合衆国でレビュー済みAmazonで購入
Chip worked very well with my Arduino. I've used analog accel/gyro sensors before (Razor 6dof), so this was my first encounter with digital. Getting it up and running took a little bit of digging, but there is plenty of information out there to guide you. The best tips I can offer you is to first find code to calibrate this thing. They HAVE to be calibrated to work properly. Jeff Rowberg is a name that will come up, he's written a lot of code for it, but the actual calibration script I found was by Luis Ródenas. You'll need to include the library file, MPU6050.h, but that should be all together. This calibration script will produce 6 calibration offset values... 3 for each of axis for both chips (3*2=6). From that point on you'll need to write those offset values to the chip at the beginning of your code using the function similar to, "accelgyro.setXGyroOffset(30)".
So bottom line is, this is an excellent board, it seems very accurate (within tenths of a degree), and works quite well once it's calibrated. Best of luck!
So bottom line is, this is an excellent board, it seems very accurate (within tenths of a degree), and works quite well once it's calibrated. Best of luck!


EngineerInRealLife
2016年3月24日にアメリカ合衆国でレビュー済み
So bottom line is, this is an excellent board, it seems very accurate (within tenths of a degree), and works quite well once it's calibrated. Best of luck!
このレビューの画像


Anas Vhora
5つ星のうち5.0
Having good hardware/shouldering skills.
2023年9月29日にインドでレビュー済みAmazonで購入
Well i am using this for making a Quadcopter with ardiuno+mpu6050 using multiwii.
I got the same module from local shop which was a shit..
It really didn't work wasted my money on that. It's sensor or microchip got brust i guess.
But this is working just as expected it to. I had a problem with I2C error which is really a basic error with your hardware.
I had a problem and my I2C errors were jumping from -32k to +32k. But after shouldering it well. It is working just fine...
This time my money didn't got waste.
I will give 4/5, why?
as per my opinion they should provide it with pins sholdered i guess! Well it's because i didn't used it for anything else then this project? Idk... if they aren't there could be a reason but it was really helpful if it comes with sholdered pins.
Afternoon thanks for this one!
I got the same module from local shop which was a shit..
It really didn't work wasted my money on that. It's sensor or microchip got brust i guess.
But this is working just as expected it to. I had a problem with I2C error which is really a basic error with your hardware.
I had a problem and my I2C errors were jumping from -32k to +32k. But after shouldering it well. It is working just fine...
This time my money didn't got waste.
I will give 4/5, why?
as per my opinion they should provide it with pins sholdered i guess! Well it's because i didn't used it for anything else then this project? Idk... if they aren't there could be a reason but it was really helpful if it comes with sholdered pins.
Afternoon thanks for this one!

acheekyfellow
5つ星のうち5.0
Good unit for the right price.
2012年12月13日にアメリカ合衆国でレビュー済みAmazonで購入
I am fairly new to Arduino projects, so this was a perfect breakout board to get my feet wet. The major down side to this product is that its difficult to find info on it (as said by other users). After finding some code, the unit seems to work pretty well... I used this board on a quadcopter to help with the inherent stability issues.
Hopefully I'll save some people the time to dig up this information. Here is a link for those doing arduino projects:
[...] --> See first comment on this post
here's the source code for the I2C library I used:
[...] --> See first comment on this post
This library contains two helpful examples; one that allows the raw accelerometer and gyroscope values to be accessed, and the other calculates Euler angles, yaw pitch roll, world accelerations, and quaternions. If you using this with an arduino, make sure that the I2C library and a MPU6050 library are in the Arduino sketch folder, this will allow it to compile correctly.
This was also difficult to find:
The GY-521 breakout board is wired to the Arduino Mega as followed:
Vcc - 3.3V
GND - GND
SCL - SCL (pin 21)
SDA - SDA (pin 20)
ADO - GND
INT - D2
The GY-521 breakout board is wired to the Arduino Uno as followed:
Vcc - 3.3V
GND - GND
SCL - D5
SDA - D4
ADO - GND
INT - D2
Hopefully I'll save some people the time to dig up this information. Here is a link for those doing arduino projects:
[...] --> See first comment on this post
here's the source code for the I2C library I used:
[...] --> See first comment on this post
This library contains two helpful examples; one that allows the raw accelerometer and gyroscope values to be accessed, and the other calculates Euler angles, yaw pitch roll, world accelerations, and quaternions. If you using this with an arduino, make sure that the I2C library and a MPU6050 library are in the Arduino sketch folder, this will allow it to compile correctly.
This was also difficult to find:
The GY-521 breakout board is wired to the Arduino Mega as followed:
Vcc - 3.3V
GND - GND
SCL - SCL (pin 21)
SDA - SDA (pin 20)
ADO - GND
INT - D2
The GY-521 breakout board is wired to the Arduino Uno as followed:
Vcc - 3.3V
GND - GND
SCL - D5
SDA - D4
ADO - GND
INT - D2