品番 | BAS5055461 |
---|---|
個数 | 1 |
電池使用 | いいえ |
電池付属 | いいえ |
主な素材 | プラスチック |
対象性別 | 男性 |
メーカー推奨年齢 | 15歳以上 |
発売日 | 2017/11/11 |
商品モデル番号 | BAS5055461 |
製品サイズ | 5.08 x 5.08 x 12.7 cm; 100 g |
ASIN | B075ZXST52 |
プライム無料体験をお試しいただけます
プライム無料体験で、この注文から無料配送特典をご利用いただけます。
非会員 | プライム会員 | |
---|---|---|
通常配送 | ¥410 - ¥450* | 無料 |
お急ぎ便 | ¥510 - ¥550 | |
お届け日時指定便 | ¥510 - ¥650 |
*Amazon.co.jp発送商品の注文額 ¥2,000以上は非会員も無料
無料体験はいつでもキャンセルできます。30日のプライム無料体験をぜひお試しください。
こちらからもご購入いただけます
過去12か月間で100%が肯定的
BANDAI SPIRITS(バンダイ スピリッツ) フィギュアライズメカニクス ドラえもん 色分け済みプラモデル
詳細はこちら
購入オプションとあわせ買い
注記: Amazon.co.jpが販売・発送する商品は 、お一人様あたりのご注文数量を限定させていただいております。お一人様あたりのご注文上限数量を超えるご注文(同一のお名前及びご住所で複数のアカウントを作成・使用されてご注文された場合を含みます。)、その他Amazon.co.jpにおいて不正なご注文と判断した場合には、利用規約に基づき、予告なくご注文をキャンセルさせていただくことがあります。
注記:Amazon.co.jpが発送する商品につきまして、商品の入荷数に限りがある場合がございます。入荷数を超える数量の注文が入った場合は、やむを得ず注文をキャンセルさせていただくことがございます。
よく一緒に購入されている商品

この商品をチェックした人はこんな商品もチェックしています
商品の情報
詳細情報
登録情報
おすすめ度 |
5つ星のうち4.3 |
---|---|
Amazon 売れ筋ランキング | - 12,784位ホビー (ホビーの売れ筋ランキングを見る) - 393位ロボットのプラモデル・模型 |
Amazon.co.jp での取り扱い開始日 | 2017/9/29 |
ご意見ご要望
重要なお知らせ
安全上のお知らせ
なし
商品の説明
商品紹介
ドラえもんがFigure-rise Mechanicsに登場!
ドラえもんの特徴的な内部メカパーツをくみ上げることで、まるで自分がドラえもんを1から組み立てるような新しいプラモデル遊びが楽しめる!
【商品内容】成型品×4、シール×1、取扱説明書×1
【付属品】クリア外装×1式、タイムマシン座り用パーツ×1式
(Amazon.co.jpより)
安全警告
なし
ブランド紹介

バンダイスピリッツ プラモデルストア
メーカーによる説明


商品内容と付属品
- 成形品×4
- シール×1
- 取扱説明書×1
- クリア外装×1式
- タイムマシン座り用パーツ×1式
詳細画像
|
|
|
---|---|---|
内部のメカ構造「ペタリハンド」や「ウルトラ・スーパー・デラックス・コンピュータ」などの内部メカのディテールを再現しました。 |
外装パーツ2種外装パーツは、通常のブルーの他に、内部メカが透けて見えるクリア外装も付属しており、組み立てた後も内部メカが見えます。 |
立ち姿(背面)ドラえもんを後ろから見たイメージです。 |
年齢に関する情報
対象年齢: 15 歳Amazon.co.jp の推奨年齢:
特定の情報をお探しですか?
イメージ付きのレビュー

-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
私が組み立てた前期版は一部だけシールでして、シールを貼るかガンダムマーカーで塗装する必要がありました。
今回買った後期版は口のパーツが色分けされてるので、子持ちのパパママさんはもちろん、ドラえもんが好きな人におすすめできる一品です。
プラモデルでした。
でも、作ってみたら案外綺麗でした。
脳内再生される声はもちろん大山のぶ代ですね
付属のクリアボディを選択しないと、完成後は内部構造が見えなくなります。
はめ込み式なので、あとでボディを変えることもできますが、多少分解が面倒です。
しかし、そんなものはバッサリ切ってしまえるくらい、現代のアートとして、このプラモデルはある種の完成に至っていると思う。
たまたまシタデルに手を出してしまい、
シルバー系統のレイヤー塗りにシェイド処理。
これだけでこのキットの魅力が数十倍にもふくれあがった。
なんという造形。薄ら笑いが出て来る。
しっかりとデコボコしているキットなので
もちろん、組むだけでも楽しいだろう。
でも、是非ともヘコんだ部分に暗い色を入れてみて欲しい。
そこには全く違う世界が待っている。
他の国からのトップレビュー


- Bandai's model kits are very good. The precision and fit are very good. The pieces are simple. This kit is very beginner friendly but is also fun for seasoned modellers as a quick project.
- It comes with transparent blue parts. Since this is snap together you can switch between the solid and transparent blue parts. However it does not have blue parts for the sitting version. If you want to have Doraemon sitting down, the leg parts is solid blue only.
- At bare minimum you need a sharp hobby knife to cut the parts off of the sprue. A side cutter will be helpful to rough cut the parts from the sprue and then clean it up with a knife, as well as some plastic glue like acetone. Get the thin, runny type instead of the thick gel type (will explain why next). This is a snap together kit so you don't need glue, and Bandai's parts tolerance is very good and all the parts have a snug fit, but, certain small parts have a higher chance of falling of or get knocked around like the bell on the collar. I'd recommend gluing the golden bell to the collar. There are a few other like the red tail ball to the tail stem that I'd also recommend gluing.
- Be gentle wit cutting the clear blue parts. Because of the nature of the clear plastic it is more brittle. Also, the part where you cut the part from the tree will tend to turn hazy white so cut carefully. If the white is too obvious, dab the tiniest amount of plastic adhesive and it will reduce the whiteness. Be very careful. Too much glue will ruin the clear piece. Use glue with a very sharp tip to slppy it.
- The parts are injection molded to colored plastic. Since the source material is flat shaded 2D animation I think it looks fine as it, but the manual does have a mini color guide if you want to paint it.
- Consider getting the Bandia Figure-Rise Mechanics Time machine. The sitting version of the body is designed to fit the seat of the time machine.
- My only suggestion for Bandai is to include an extra set of the white fist pieces, so you don't have to swap the fist if you want to switch between solid and transparent. Also, would be nice to have transparent pieces for the sitting version of the legs and arms.
Overall, a quality model, a fun build, and reasonably priced. I'm tempted to get another one.


Ha costado un poco montarla porque tiene muchas piezas pequeñitas que forman la estructura interna del robot pero es precioso una vez la tienes lista. Es una pieza de coleccionista, no recomendada para jugar ni para niños.
