ブランド | AFUNTA |
---|---|
製品型番 | AF-blade+holder |
梱包サイズ | 12.9 x 8.6 x 4.4 cm; 110 g |
色 | シルバー, イエロー, ブルー, レッド, ブラック |
表札の名字 | インダストリアル |
入数 | 30, 10 |
電池付属 | いいえ |
商品の重量 | 110 g |
AFUNTA 30個(30/45/60度)ブレードカッタープロッターカッターブレードCB09 CB09U Graphtecブレードホルダーベース付
購入オプションとあわせ買い
ブランド | AFUNTA |
色 | シルバー, イエロー, ブルー, レッド, ブラック |
スタイル | インダストリアル |
この商品について
- 30刃:Graphtec CB09U CB09と互換性があり、タングステン超硬合金製です。 高い硬度、スプリングとブレードホルダーベースが付属しています。 各度10個。
- 適用:精密研磨プロセス、マホガニー、木材、PVCカラーボード、MDFおよび他の精密なレリーフに適しています。
- 30°:30°のブレードは、非常に薄い窓の色合いおよびマイラー材を切断するために主に使用される。
- 45°:45°ブレードは、ほとんどのビニルカッターに付属する標準ブレードです。 これらは、標準的なキャストおよびカレンダー加工されたビニールだけでなく、ThermoFlex Plusなどの他の薄い素材にもおすすめです。
- 60°:60°のブレードは、反射膜、フロックおよびツイル材、さらにはサンドブラストレジストなどのより厚い材料に推奨されます。
よく一緒に購入されている商品
この商品をチェックした人はこんな商品もチェックしています
特定の情報をお探しですか?
商品の情報
詳細情報
登録情報
ASIN | B07G97TL5Z |
---|---|
おすすめ度 |
5つ星のうち4.4 |
Amazon 売れ筋ランキング | - 88,439位DIY・工具・ガーデン (DIY・工具・ガーデンの売れ筋ランキングを見る) - 147位レシプロソー |
Amazon.co.jp での取り扱い開始日 | 2018/9/1 |
ご意見ご要望
商品の説明
仕様:
材質:タングステン超硬合金
ブレードの長さ:12mm
ホルダーの長さ:51.8mm
ブレードの度合い:30/45/60度
パッケージに含まれるもの:
1 xブレードホルダー
10 x 30度カッターブレード(イエロー)
10 x 45度カッターブレード(赤)
10 x 60度カッターブレード(青色)
ヒント:
1.ブレードは、刃のホルダーを離れて刻まれたストロークを避けるために、小さなプリントを刻むときに適切に長いブレードに適切に長い注意を払っている間、一般的に半ミリメートル以内に、より良いですが、長く伸ばさないでください。 新しいカッターとスローダウンを施したスモールプリント。
2.角現象で刻まれた言葉は、あなたがブレードを変更した後に現象が持続する場合は、問題を排除するためにブレードを変更する必要があります、それはホルダーの問題でなければなりません。
3.ブレードホルダーに問題が発生したら、ベアリングにオイルを滴下し、ブレードを数回回転させて潤滑油を与えます。まだ解決していない場合は、ブレードホルダーの交換を検討してください。
イメージ付きのレビュー
-
トップレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
ただしオートブレードと認識されましたので、ラチェットブレードに変更。
30度の刃も良い感じです、刃は減っていくと小さい文字の形状がおかしくなるのでそこが目安です。
刃の出し具合は、スケールを印刷して貼って目安にしてます。
ただしオートブレードと認識されましたので、ラチェットブレードに変更。
30度の刃も良い感じです、刃は減っていくと小さい文字の形状がおかしくなるのでそこが目安です。
刃の出し具合は、スケールを印刷して貼って目安にしてます。
新しいブレードを入れて、写真のブラウン色紙を切ったら、次は白紙を切りました。場所によるもうスムーズに切り取れない。このままだとブレード30本あってもすぐ使い切れちゃいそう、、、
I cut a lot of 200-300gsm cardstock with my cameo4 and unfortunately these blades dull out really fast. The Kraft brown cardstock in the photo was cut with a fresh blade, the white cardstock was cut right after and there's already a difference in the detailed potions. I get 5-6 pages of decent cuts per blade. I also had 1 defective 45degree blade in my pack that worried me but the rest seem to be fine so far.
Since the price is very reasonable I might buy again in a pinch but still disappointed over how fast they dull...
新しいブレードを入れて、写真のブラウン色紙を切ったら、次は白紙を切りました。場所によるもうスムーズに切り取れない。このままだとブレード30本あってもすぐ使い切れちゃいそう、、、
I cut a lot of 200-300gsm cardstock with my cameo4 and unfortunately these blades dull out really fast. The Kraft brown cardstock in the photo was cut with a fresh blade, the white cardstock was cut right after and there's already a difference in the detailed potions. I get 5-6 pages of decent cuts per blade. I also had 1 defective 45degree blade in my pack that worried me but the rest seem to be fine so far.
Since the price is very reasonable I might buy again in a pinch but still disappointed over how fast they dull...
他の国からのトップレビュー
The... flange, I guess... is bigger than the pen adapter from a Cameo 4 can accommodate without an uncomfortable amount of pressure, but the 3d-printed options (DIY, etsy, etc...) are much better anyway.
So, yeah, pay a few bucks extra and grab this. I just got two more so I can have a full set of blades awaiting duty without needing to adjust anything!
Some other reviews stated the blades are to thick to fit, But there are two different cb09 blade holders.
1. where the blade fits into the main body of the holder with the spring on the blade.
2. and one where it fits into the black cap with the spring brass cup. (no spring on the blade)
Search Youtube for (Silhouette Cameo - How to cut felt blade cb-09 review) it shows both.
Mine is the second one.
I also made my own blade rule template with silhouette machine.
2023年3月22日に英国でレビュー済み
Some other reviews stated the blades are to thick to fit, But there are two different cb09 blade holders.
1. where the blade fits into the main body of the holder with the spring on the blade.
2. and one where it fits into the black cap with the spring brass cup. (no spring on the blade)
Search Youtube for (Silhouette Cameo - How to cut felt blade cb-09 review) it shows both.
Mine is the second one.
I also made my own blade rule template with silhouette machine.